▦
Sectional Panel Construction
Panel-based construction can suit different tank dimensions and capacities within the selected manufacturer's design range.
Elevated Water Storage • Project Supply
Overhead GRP / SMC Panel Water Tank with Steel Tower
Sectional water storage tank solutions with optional engineered steel support tower arrangements for residential, commercial, industrial and infrastructure projects. Capacity enquiries from 1,000 to 50,000 litres can be reviewed against the selected tank system, site conditions and supplier's confirmed range.
Elevated Sectional Tank Solutions for Water Storage
SMC (Sheet Moulding Compound) and GRP (Glass Reinforced Plastic) tanks use moulded composite panels assembled into a specified storage volume. An overhead tank with a steel tower requires coordinated tank design, support structure, foundation and installation planning. Amerigo Exports Pvt. Ltd. invites project enquiries from buyers and contractors in India and overseas.
⌂
Elevated Steel Support
A steel tower can elevate the tank where required, provided the tower and foundation are designed for the full tank load and site conditions.
◎
Project-Specific Selection
Tank material, fittings, support height and capacity should be confirmed from the project requirements and supplier's technical documentation.
Benefits of GRP / SMC Overhead Water Tanks
- Capacity options: enquiries can be considered for 1,000–50,000 litres, subject to product availability and design confirmation.
- Modular assembly: sectional panels may simplify transportation to sites with limited access.
- Corrosion resistance: suitable composite materials can perform well in many water-storage environments.
- Elevated supply: a properly designed elevated arrangement can form part of a gravity-fed distribution system.
- Multiple applications: residential, commercial, industrial and selected infrastructure projects.
- Fittings as specified: inlet, outlet, overflow, drain, vent, access cover and level-control provisions can be discussed.
- Flexible project planning: tank dimensions, tower height and access requirements can be reviewed together.
- Export enquiries: suitable for discussions with importers, contractors, distributors and project procurement teams.
Engineering notice: the full tank's water weight is substantial. A qualified structural engineer must design or approve the tower, bracing, connections and foundation for the tank's filled weight, wind, seismic conditions where applicable and local codes.
Tank Capacity Range: 1,000 to 50,000 Litres
Select the required nominal capacity for quotation. Actual dimensions, panel configuration, usable volume and availability vary by manufacturer and design. The capacities below are enquiry options, not a guarantee that every size is available as a standard model.
| Capacity group | Example enquiry capacities | Details to confirm |
|---|---|---|
| Small | 1,000–5,000 L | Footprint, height, access and support arrangement |
| Medium | 6,000–15,000 L | Panel layout, fittings, tower height and foundation |
| Large | 16,000–30,000 L | Structural loads, bracing, maintenance access and installation plan |
| Project scale | 31,000–50,000 L | Engineered tower design, site conditions, lifting and assembly plan |
Steel Tower for Overhead GRP / SMC Tanks
A steel support tower is a structural component and must be specified to suit the selected tank and site. The tank supplier, structural designer and installation contractor should coordinate the interface before manufacturing or installation.
Required Tower Height
Specify the height from finished ground level to the tank support level, based on the project's water-pressure and layout requirements.
Structure & Foundation
Confirm design loads, steel sections, bracing, connection details, corrosion protection and foundation design with the responsible engineer.
Access & Safety
Consider safe access, inspection space, ladders/platforms, fall protection and maintenance provisions according to local regulations.
Applications
Residential Developments
Apartment buildings, housing projects and residential communities.
Commercial Buildings
Hotels, offices, shopping centres, schools and institutional facilities.
Industrial Sites
Factories and industrial premises for approved service-water duties.
Construction & MEP
Contractors coordinating tank supply, plumbing connections and elevated storage structures.
Infrastructure
Selected public facilities and project sites with engineered elevated storage requirements.
Export Distribution
Importers and distributors sourcing sectional water storage solutions from India.
Information Required for a Quotation
| Requirement | Information to share |
|---|---|
| Tank capacity | Required litres and usable storage volume |
| Tank dimensions | Preferred length × width × height or available footprint |
| Tower height | Required height and site elevation details |
| Structural documents | Approved drawings, design loads and foundation information, if available |
| Water application | Potable water, service water or other use and applicable standards |
| Accessories | Inlet/outlet, overflow, drain, vent, access cover, ladder and level controls |
| Destination | Country/city, delivery term, target delivery date and site access conditions |
Material grade, panel dimensions, certifications, warranty, delivery lead time and whether the steel tower is included must be confirmed in the formal supplier quotation.
Need a Tank and Steel Tower Quotation?
Share the capacity, required tower height, location and project drawings if available.
Request a Quote — Overhead GRP / SMC Tank with Steel Tower
Contact Amerigo Exports Pvt. Ltd. with your water storage and elevated support requirements. Enquiries are welcome from project contractors, importers, distributors and procurement teams.
Amerigo Exports Pvt. Ltd.
Address: 5B, Prerna Soc.-1, Parasnagar, Isanpur, Ahmedabad – 382443, Gujarat, India
Mobile / WhatsApp: +91-9925362065
Telephone: +91-7567772304
Email: sales@amerigoexports.com
Website: www.amerigoexports.com